PVCU & ALUMINIUM DOOR
REPAIRS THROUGHOUT
DURHAM
Looking for specialist door repairs and
installations? You have come to the right place.
Contact J.E.D Double Glazing Repairs today.
We are commited to extending the life of your existing doors.
PVCU DOORS
JED specialise in repairing PVCu and aluminium doors, fitting
new locks, hinges and hardware.
Most problems with PVCu doors revolve around poor original
installation of the door which results in the door sash
dropping in the frame causing the door to drag over the
frame at the bottom. This in turn makes the lock difficult to
operate and extra force required to close. This extra force
results in a strained door locking mechanism often stripping
the gears in the lock and preventing the door from opening.
Early diagnosis of the problem can stop this happening, the
door can be adjusted and relocated in the frame allowing the
locks to engage correctly. Damaged or worn locking
mechanisms can be replaced and we stock most of the
popular makes. Please see my page devoted to locks for
information regarding upgrading.
COMPOSITE DOORS
Composite doors are the latest development in
replacement doors and work on a different
principle having a solid door leaf or slab, available
in a range of colours and designs fitting into the
door frame rebate providing a smooth appearance
as opposed to fitting over the edge of the frame in
a PVCu panel door. The doors are of a cellular
construction and are extremely strong and virtually
unbreakable, The doors rely on a woolpile draught
seal and usually are locked with a double hook lock
mechanism with six lever dead lock.
DOOR PANELS
Feature door panels are mainly confined to PVCu doors but
some do occur in aluminium doors. Those in PVCu doors
vary in thickness and density. There are many designs but
the important features are in the construction. In the early
days of door panel production little was known of the colour
fading effects of sunlight. Soon lots of door panels changed
colour giving a two tone appearance to the door because
the higher grade PVCu used in the door frame remained
white. Also the doors were constructed using polystyrene
foam as a filler between the outer decorative skins. This
resulted in flimsy doors with "kick out" door panels. All of
our door panels are fully reinforced with high grade MDF
together with polystyrene for insulation and are guaranteed
against colour fade. By replacing the panel the whole image
of the door can be changed as well as increasing security.
Please telephone for a quotation.
HINGES
Older PVCu doors are fitted with "pencil" hinges, tubular in shape
and non adjustable. These can be replaced if broken, and
replacements also usually provide some adjustment of the door.
Newer doors are fitted with three way "pad" hinges. These hinges
are fitted to the face of the door and provide adjustment in three
directions similar to kitchen cupboard hinges. These hinges are
generally stronger but casting failure can result in breakage.
Replacements are readily available.
ALUMINIUM DOORS
Aluminium doors usually rely on
a mortice type lock and possibly
shoot bolts at the top and
bottom. As these doors are
becoming rare the components
to repair are becoming more
scarce. Each door must be
appraised for availability of parts.
"Mike and Alan fixed our doors so that they open, close and lock with no effort. I would recommend JED as the only place
to go for any double glazing repair that you need."
- PaulM-183
For window, door or conservatory repairs
in County Durham, call or email us
0191 384 4903
07712 069 739
mdavisonj@aol.com
© JED DOUBLE GLAZING REPAIRS 2020
OPENING TIMES | MONDAY - FRIDAY 9.00AM - 5.00 PM
0191 384 4903
07712 069 739
ASK FOR MIKE
PVCU & ALUMINIUM
DOOR REPAIRS
THROUGHOUT
DURHAM
Looking for specialist door
repairs and installations? You
have come to the right place.
Contact J.E.D Double Glazing
Repairs today.
We are commited to extending
the life of your existing doors.
PVCU DOORS
JED specialise in
repairing PVCu
and aluminium
doors, fitting new
locks, hinges and
hardware.
Most problems with PVCu doors
revolve around poor original
installation of the door which
results in the door sash dropping
in the frame causing the door to
drag over the frame at the
bottom. This in turn makes the
lock difficult to operate and extra
force required to close. This extra
force results in a strained door
locking mechanism often
stripping the gears in the lock
and preventing the door from
opening. Early diagnosis of the
problem can stop this happening,
the door can be adjusted and
relocated in the frame allowing
the locks to engage correctly.
Damaged or worn locking
mechanisms can be replaced and
we stock most of the popular
makes. Please see my page
devoted to locks for information
regarding upgrading.
COMPOSITE DOORS
Composite doors
are the latest
development in
replacement doors
and work on a
different principle
having a solid door
leaf or slab, available in a range
of colours and designs fitting into
the door frame rebate providing
a smooth appearance as
opposed to fitting over the edge
of the frame in a PVCu panel
door. The doors are of a cellular
construction and are extremely
strong and virtually unbreakable,
The doors rely on a woolpile
draught seal and usually are
locked with a double hook lock
mechanism with six lever dead
lock.
DOOR PANELS
Feature door
panels are mainly
confined to PVCu
doors but some do
occur in aluminium
doors. Those in
PVCu doors vary in
thickness and density. There are
many designs but the important
features are in the construction.
In the early days of door panel
production little was known of
the colour fading effects of
sunlight. Soon lots of door panels
changed colour giving a two tone
appearance to the door because
the higher grade PVCu used in
the door frame remained white.
Also the doors were constructed
using polystyrene foam as a filler
between the outer decorative
skins. This resulted in flimsy
doors with "kick out" door panels.
All of our door panels are fully
reinforced with high grade MDF
together with polystyrene for
insulation and are guaranteed
against colour fade. By replacing
the panel the whole image of the
door can be changed as well as
increasing security. Please
telephone for a quotation.
ALUMINIUM DOORS
Aluminium doors usually rely on a
mortice type lock and possibly
shoot bolts at the top and
bottom. As these doors are
becoming rare the components to
repair are becoming more scarce.
Each door must be appraised for
availability of parts.
"Mike and Alan fixed our doors so that
they open, close and lock with no
effort. I would recommend JED as the
only place to go for any double glazing
repair that you need."
- Paul M
HINGES
Older PVCu doors are fitted with
"pencil" hinges, tubular in shape
and non adjustable. These can be
replaced if broken, and
replacements also usually
provide some adjustment of the
door. Newer doors are fitted with
three way "pad" hinges. These
hinges are fitted to the face of the
door and provide adjustment in
three directions similar to kitchen
cupboard hinges. These hinges
are generally stronger but casting
failure can result in breakage.
Replacements are readily
available.
For window, door or conservatory repairs
in County Durham, call or email us
0191 384 4903
07712 069 739
mdavisonj@aol.com
OPENING TIMES | MONDAY - FRIDAY
9.00AM - 5.00 PM
© JED DOUBLE GLAZING REPAIRS 2020
PVCU & ALUMINIUM DOOR
REPAIRS THROUGHOUT
DURHAM
Looking for specialist door repairs and installations?
You have come to the right place. Contact J.E.D Double
Glazing Repairs today.
We are commited to extending the life of your existing doors.
PVCU DOORS
JED specialise in repairing PVCu and aluminium doors, fitting
new locks, hinges and hardware.
Most problems with PVCu doors revolve around poor original
installation of the door which results in the door sash
dropping in the frame causing the door to drag over the
frame at the bottom. This in turn makes the lock difficult to
operate and extra force required to close. This extra force
results in a strained door locking mechanism often stripping
the gears in the lock and preventing the door from opening.
Early diagnosis of the problem can stop this happening, the
door can be adjusted and relocated in the frame allowing the
locks to engage correctly. Damaged or worn locking
mechanisms can be replaced and we stock most of the
popular makes. Please see my page devoted to locks for
information regarding upgrading.
COMPOSITE DOORS
Composite doors are the latest development in
replacement doors and work on a different principle
having a solid door leaf or slab, available in a range of
colours and designs fitting into the door frame rebate
providing a smooth appearance as opposed to fitting
over the edge of the frame in a PVCu panel door. The
doors are of a cellular construction and are extremely
strong and virtually unbreakable, The doors rely on a
woolpile draught seal and usually are locked with a
double hook lock mechanism with six lever dead lock.
DOOR PANELS
Feature door panels are mainly confined to PVCu doors but some do
occur in aluminium doors. Those in PVCu doors vary in thickness and
density. There are many designs but the important features are in the
construction. In the early days of door panel production little was
known of the colour fading effects of sunlight. Soon lots of door
panels changed colour giving a two tone appearance to the door
because the higher grade PVCu used in the door frame remained
white. Also the doors were constructed using polystyrene foam as a
filler between the outer decorative skins. This resulted in flimsy doors
with "kick out" door panels. All of our door panels are fully reinforced
with high grade MDF together with polystyrene for insulation and are
guaranteed against colour fade. By replacing the panel the whole
image of the door can be changed as well as increasing security.
Please telephone for a quotation.
HINGES
Older PVCu doors are fitted with "pencil" hinges, tubular in shape and non
adjustable. These can be replaced if broken, and replacements also
usually provide some adjustment of the door. Newer doors are fitted with
three way "pad" hinges. These hinges are fitted to the face of the door
and provide adjustment in three directions similar to kitchen cupboard
hinges. These hinges are generally stronger but casting failure can result
in breakage. Replacements are readily available.
ALUMINIUM
DOORS
Aluminium doors usually rely on a
mortice type lock and possibly shoot
bolts at the top and bottom. As
these doors are becoming rare the
components to repair are becoming
more scarce. Each door must be
appraised for availability of parts.
"Mike and Alan fixed our doors so that they open, close and lock with no effort. I would recommend JED as the only place
to go for any double glazing repair that you need."
- PaulM-183
For window, door or conservatory repairs
in County Durham, call or email us
0191 384 4903
07712 069 739
mdavisonj@aol.com
© JED DOUBLE GLAZING REPAIRS 2020
OPENING TIMES | MONDAY - FRIDAY 9.00AM - 5.00 PM
PVCU & ALUMINIUM DOOR
REPAIRS THROUGHOUT
DURHAM
Looking for specialist door repairs and installations?
You have come to the right place. Contact J.E.D Double
Glazing Repairs today.
We are commited to extending the life of your existing doors.
PVCU DOORS
JED specialise in repairing PVCu and aluminium doors, fitting
new locks, hinges and hardware.
Most problems with PVCu doors revolve around poor original
installation of the door which results in the door sash
dropping in the frame causing the door to drag over the
frame at the bottom. This in turn makes the lock difficult to
operate and extra force required to close. This extra force
results in a strained door locking mechanism often stripping
the gears in the lock and preventing the door from opening.
Early diagnosis of the problem can stop this happening, the
door can be adjusted and relocated in the frame allowing the
locks to engage correctly. Damaged or worn locking
mechanisms can be replaced and we stock most of the
popular makes. Please see my page devoted to locks for
information regarding upgrading.
COMPOSITE DOORS
Composite doors are the latest development in
replacement doors and work on a different principle
having a solid door leaf or slab, available in a range of
colours and designs fitting into the door frame rebate
providing a smooth appearance as opposed to fitting
over the edge of the frame in a PVCu panel door. The
doors are of a cellular construction and are extremely
strong and virtually unbreakable, The doors rely on a
woolpile draught seal and usually are locked with a
double hook lock mechanism with six lever dead lock.
DOOR PANELS
Feature door panels are mainly confined to PVCu doors but some do
occur in aluminium doors. Those in PVCu doors vary in thickness and
density. There are many designs but the important features are in the
construction. In the early days of door panel production little was
known of the colour fading effects of sunlight. Soon lots of door
panels changed colour giving a two tone appearance to the door
because the higher grade PVCu used in the door frame remained
white. Also the doors were constructed using polystyrene foam as a
filler between the outer decorative skins. This resulted in flimsy doors
with "kick out" door panels. All of our door panels are fully reinforced
with high grade MDF together with polystyrene for insulation and are
guaranteed against colour fade. By replacing the panel the whole
image of the door can be changed as well as increasing security.
Please telephone for a quotation.
HINGES
Older PVCu doors are fitted with "pencil" hinges, tubular in shape and non
adjustable. These can be replaced if broken, and replacements also
usually provide some adjustment of the door. Newer doors are fitted with
three way "pad" hinges. These hinges are fitted to the face of the door
and provide adjustment in three directions similar to kitchen cupboard
hinges. These hinges are generally stronger but casting failure can result
in breakage. Replacements are readily available.
ALUMINIUM
DOORS
Aluminium doors usually rely on a
mortice type lock and possibly shoot
bolts at the top and bottom. As
these doors are becoming rare the
components to repair are becoming
more scarce. Each door must be
appraised for availability of parts.
"Mike and Alan fixed our doors so that they open, close and lock with no effort. I would recommend JED as the only place
to go for any double glazing repair that you need."
- Paul M
For window, door or conservatory repairs
in County Durham, call or email us
0191 384 4903
07712 069 739
mdavisonj@aol.com
© JED DOUBLE GLAZING REPAIRS 2020
OPENING TIMES | MONDAY - FRIDAY 9.00AM - 5.00 PM
0191 384 4903
ASK FOR MIKE
J.E.D Double Glazing Repairs
0191 384 4903
ASK FOR MIKE
J.E.D Double Glazing Repairs
0191 384 4903
ASK FOR MIKE
J.E.D Double Glazing Repairs